Briskheat General Purpose Constant-Wattage Heating Cable (FE)

General Purpose Constant-Wattage Heating Cable (FE)

Constant-Wattage Heating Cable provides precise and constant temperature output regardless of ambient and surface temperatures. Select below your desired cable length, by adding the number of feet to cart for the constant watt heating cable required.

• Ideal for mid-range process temperature control up to 400⁰F (204⁰C).
• Ideal heating cable for long run applications.
• Durable construction:  FEP fluoropolymer extruded jacket with tinned copper or stainless steel over braid.
• Easily installed around most piping and equipment.
• Can be cut-to-length and terminated at the job site.
• Multiple third-party approvals for ordinary and hazardous area environments.
• Not suitable for installation in wet locations and outdoor use.

• Maximum exposure temperature is 400°F (204°C)
• Available in 3, 5, 8, and 12 watts/ft (10, 16, 26, and 39 watts/m)
• Available in voltages 120, 208, 240, 277, and 480VAC
• Circuit lengths up to 1,440ft (439m)
•  12AWG bus wires
• Dimensions 0.2" x 0.3" (5mm x 8mm)
• Weight: 40 lb (18 kg) per 500 ft (152m) spool
• 
• Ordinary Locations
• Hazardous Location (T3 rated):
•    Class I Division 2 Groups B, C, D
•    Class II Division 2 Groups F, G
•    Class III Division 2
• Ordinary locations (120 and 240VAC only)      

Approval valid only when used with appropriate heating cable and installation accessories, and installed in accordance with all applicable instructions, codes, and regulations.

from BriskHeat