Inor IPAQ

IPAQ is an intelligent 2-wire transmitter for temperature and other measurement applications. IPAQ-HX is the Intrinsic Safe version for use in Exapplications. The Windows based and user friendly software, IPRO 4, is used for transmitter configuration, documentation, monitoring and calibration purposes.

Input

RTD's and Resistance

Pt100 (IEC751, a=0.00385) 3-,4-wire connection

-200 to +1000 ^°C/ -328 to +1832^°F

Pt1000 (IEC751, a = 0.00385) 3-, 4-wire connection

-200 to +200 ^°C/ -328 to +392 ^°F

PtX 10 £ X £ 1000 (IEC751, a = 0.00385) 3-, 4-wire connection

Ni100 (DIN 43760) 3-, 4-wire connection -60 to +250 ^°C

Ni1000 (DIN 43760) 3-, 4-wire connection -60 to +150 ^°C

D100 (Pt 100 acc.to JIS1604, a = 0.003916) 3-, 4-wire connection

-200 to +1000 ^°C / -328 to +1832 ^°F

Thermocouples and Voltage T/C Type:

AE, B, E, J, K, L, N, R, S, T, U

Ranges according to user’s manual

Voltage input

-10 to +500 mV

Input impedance >10 MW

Maximum sensor wire resistance 500 W (total loop)

Monitoring

Sensor break monitoring User definable output 3.5 to 21.6 mA

Smart Sense, sensor isolation monitoring

User definable output 3.5 to 21.6 mA

Adjustments

Zero adjustment All inputs Any value within range limits

Minimum spans Pt100, Pt1000, Ni100, Ni1000 10 °C / 18 °F

Potentiometer 10 W

T/C, mV 2 mV

Output

4-20/20-4 mA Temperature Linear Resolution 5 mA

General data

Galvanic Isolation

1500Vac 1 MIN, iPAQ-PLUS 3750 Vac

Typical Accuracy

+/-- 0.1% Span IPAQ plus +/- 0.05%

Intrinsic safety

I PAQ-HX, ATEX II 1 G EEx ia IIC T4, T5, T6

FM Class I, Div. 1, Group A-D, T4

Supply voltage

IPAQ-H 6.5 to 36 VDC 2-wire IPAQ-L 7.5-36 VDC

IPAQ-HX and LX 8.0 to 30 VDC 2-wire