Newport Web-based Temperature/RH/Dew Point Monitor/Recorder
- Virtual Chart Recorder
- Web Server
- Alarms by Email or Text Message
- Record Years of Data on Popular SD Cards
- No Special Software Required
The NEWPORT® iSD environmental monitor provides Web-based remote surveillance of environmental conditions in critical HVAC applications such as computer server rooms, clean rooms, laboratories, museums, warehouses, or any remote facility. View and record Temperature, Relative Humidity and Dew Point over an Ethernet network or the Internet with no special software—just a Web browser.
The device can trigger an alarm if temperature or humidity goes above or below a set point that you determine. Your alarm can be sent by email to a single user or to a group distribution list, including text messages to cell phones and PDA’s.
The iSD includes screw terminals for two contact closures that work with common alarm sensors. You can instruct the iSD monitor to send an alarm if a door is opened, a window is broken, or a fire sprinkler goes off.
The iSD monitor can trigger an alarm if the AC power fails. The iSD monitor will continue to collect data for two days powered by a standard 9 Volt alkaline battery (included). A failure on the Ethernet network will not interrupt data recording.
The iSD monitor includes two 1.5 Amp output relays that are controlled by the alarm conditions you select. The relays can trigger flashing lights and a siren for example to alert personnel near the scene. With the easy Web-based setup page, the two relays can be programmed for any combination of temperature or humidity, and high or low set points, as well as alarm conditions triggered by contact closures. The relays can also be programmed to turn off when conditions return to normal, or programmed to remain latched and require a manual reset.
View Charts and Graphs on the Web
The iSD serves Active Web Pages to display real time readings, display charts of temperature and humidity, or log data in standard data formats for use in a spreadsheet or data acquisition program such as Excel or Visual Basic.
The virtual chart viewed on the web page is a JAVA™ Applet that records a chart over the LAN or Internet in real time. With the iSD, there is no need to invest time and money learning a proprietary software program to log or chart the data.
Chart scales are fully adjustable on the fly. For example, the chart can display one minute, one hour, one day, one week, one month or one year. Temperature and humidity can be charted across the full span (-40 to 124°C, and 0 to 100% RH) or within any narrow range such as (20 to 30°C).
Link to Web CAM or IP Camera
The Web page includes a link to a "Web Cam" or "IP camera" (not included). If you get a message about an alarm condition, you can quickly click on the link to view the actual scene over the Internet.
SD Flash Memory Card
The iSD comes complete with a removable 2 GB SD Flash Memory card that can store up to seven years of readings taken at ten second intervals.
Records on SD Flash Cards
The data is recorded on widely available SD (Secure Digital) flash cards. The format is a simple “.txt” text file that is easily imported to spread sheets and other programs. It can be read directly on a PC or MAC with a USB card reader. You can also download the data remotely over an Ethernet network or the Internet.
Sensor and Calibration
The iSD monitors come complete with a plug-in temperature and humidity probe that mounts on the instrument or separately with the six foot extension cable (included). It is not necessary to take the iSD monitor out of service for routine calibration. The temperature/ humidity sensors are interchangeable and can be replaced for about the same cost as a typical calibration. Newport offers replacement sensors with optional 3-point NIST traceable calibration certificates. Installation and operation of the iSD monitor requires no special training, tools, or software. The device connects to any Ethernet network with standard cable and plugs and is powered by any AC outlet supplying 110 to 240 Vac.
The iSD is simple to install and use, and features Newport’s award-winning iServer technology that requires no special software except a Web Browser.
The iSD connects to an Ethernet Network with a standard RJ45 connector and sends data in standard TCP/IP packets.
It is easily configured with a simple menu using a Web Browser and can be password protected. From within an Ethernet LAN or over the Internet, the user simply types its IP address or an easy to remember name such as "Cleanroom 5" or "Midwest Server Room" in any Web Browser, and the iSD serves a Web Page with the current readings.
The iSD is great for monitoring temperature + humidity in applications such as: clean rooms, computer rooms, HVAC systems, pharmaceutical and food processing and storage, hospitals, laboratories, semiconductor fabs, electronic assembly, warehousing, museums, manufacturing, greenhouses, farm animal shelters, and many more.
See Product Features section for specifications.
|iSD-TH||$545.00||iSD monitor for temperature + humidity and dewpoint, LCD display, 2GB SD flash memory card, 2 relay alarms, battery back-up, and universal (100-240 Vac) power adapter. Standard right angle probe and 1.8m (6 ft) extension cable.|
|iSD-TH-5||$570.00||iSD monitor for temperature + humidity and dewpoint, LCD display, 2 GB SD flash memory card, 2 relay alarms, battery back-up, and universal (100-240 Vac) power adapter. Industrial 137mm (5") Probe, 3m (10 ft) cable.|
|iSDTHP||$118.00||Replacement standard right angle probe|
|iSDTHP-5||$145.00||Replacement industrial 137mm (5") probe, cable 3m (10 ft).|
|iSD-CABLE-6||$16.10||Replacement extension cord, 1.8m (6 ft) long, for detached probe|
|IP-PCW-10P||$22.00||Porous Polyethylene right angle probe cap, for wet environments, 10 pack|
|IP-PCI-10P||$22.00||Porous Polyethylene industrial probe cap, for wet environments, 10 pack|
|IP-SC||$27.50||Porous stainless steel industrial probe cap, 5um porosity, for dusty and pressurized (< 35 psi) environments|
|IND-KIT||$8.25||Replacement Mounting Kit, for external industrial probes|
|UNIV-AC-100/240||$27.50||Replacement universal ac power adapter|
Round-the-clock free hotline (24/7)
Return & ExchangeYou can return or exchange the item within 14 days.
Satisfaction GuaranteeWe are committed to your satisfaction with every order.