BriskHeat Gas Cylinder Warmer - Class I, Division 1 (HCW Series)

BriskHeat Gas Cylinder Warmer - Class I, Division 1 (HCW Series)

BriskHeat FGDH Full-Coverage Drum Heater For Metal

BriskHeat FGDH Full-Coverage Drum Heater For Metal

Briskheat TOTE Wrap-around Tote Tank / Intermediate Bulk Container (IBC) Heater

As low as $1,639.00

TOTE Wrap-around Tote Tank / Intermediate Bulk Container (IBC) Heater

Wrap around IBC / TOTE tank heaters are an all-in-one IBC Tank Heater solution with built-in insulation and a temperature controller to maximize heat efficiency and heat-up time. Designed to wrap around an IBC/TOTE to heat the contents while insulating to keep the heat exactly where it needs to be. Wrap around IBC/TOTE heaters provide the most practical, efficient means of freeze protection, viscosity control, thermal mixing, and temperature maintenance of materials.

  • Easy-to-use dial temperature controller available in °F or °C (see ordering options).
  • Plug-and-Play design is ready for immediate use out of the box.
  • Fits any container with a total perimeter between 160” (4064mm) to 192” (4877mm).
  • Available in three standard height sizes to meet your needs.
  • Designed for use with caged or direct contact metal and plastic IBC/TOTE containers.
  • Two-Zone heater design allows heat output to be adjusted when content levels decrease.
  • Non-Invasive wrap-around heater design allows you to heat a tote tank / IBC from the outside without risk of contaminating or scorching materials inside.
  • Built-in manual reset high-limit safety thermostat to prevent over-heating.
  • Grounded heating element meets NEC 427.23.
  • Attachment method using adjustable nylon straps with buckles (Two across the top and three around the tank).
  • Adjustable nylon straps allow the heater to fit a wide variety of tank sizes without sagging, reducing incidental damage from forklifts.
  • Mouse-hole cut-out reduces downtime by providing easy access to spigot without requiring the user to remove the heater.
  • Speed up the flow of slow moving and uncooperative contents such as honey, molasses, lube oil, and more!
CEROHS

* For increased thermal efficiency, add a BriskHeat IBC/TOTE cover reduce heat loss through the top surface. See IBC/TOTE tank heater accessories for more information

* 240VAC model is strongly recommended for applications that involve heat-up and melting due to the higher wattage requirements.

BriskHeat
from BriskHeat

Only %1 left
SKU
TOTE IBC
Briskheat TOTE Wrap-around Tote Tank / Intermediate Bulk Container (IBC) Heater is available to buy in increments of 1

TOTE Wrap-around Tote Tank / Intermediate Bulk Container (IBC) Heater

Wrap around IBC / TOTE tank heaters are an all-in-one IBC Tank Heater solution with built-in insulation and a temperature controller to maximize heat efficiency and heat-up time. Designed to wrap around an IBC/TOTE to heat the contents while insulating to keep the heat exactly where it needs to be. Wrap around IBC/TOTE heaters provide the most practical, efficient means of freeze protection, viscosity control, thermal mixing, and temperature maintenance of materials.

  • Easy-to-use dial temperature controller available in °F or °C (see ordering options).
  • Plug-and-Play design is ready for immediate use out of the box.
  • Fits any container with a total perimeter between 160” (4064mm) to 192” (4877mm).
  • Available in three standard height sizes to meet your needs.
  • Designed for use with caged or direct contact metal and plastic IBC/TOTE containers.
  • Two-Zone heater design allows heat output to be adjusted when content levels decrease.
  • Non-Invasive wrap-around heater design allows you to heat a tote tank / IBC from the outside without risk of contaminating or scorching materials inside.
  • Built-in manual reset high-limit safety thermostat to prevent over-heating.
  • Grounded heating element meets NEC 427.23.
  • Attachment method using adjustable nylon straps with buckles (Two across the top and three around the tank).
  • Adjustable nylon straps allow the heater to fit a wide variety of tank sizes without sagging, reducing incidental damage from forklifts.
  • Mouse-hole cut-out reduces downtime by providing easy access to spigot without requiring the user to remove the heater.
  • Speed up the flow of slow moving and uncooperative contents such as honey, molasses, lube oil, and more!
CEROHS

* For increased thermal efficiency, add a BriskHeat IBC/TOTE cover reduce heat loss through the top surface. See IBC/TOTE tank heater accessories for more information

* 240VAC model is strongly recommended for applications that involve heat-up and melting due to the higher wattage requirements.

BriskHeat
from BriskHeat

More Information
Manufacturer BriskHeat
Child Skus TOTE361-ADJV,TOTE361-ADJV-C,TOTE362-ADJV,TOTE362-ADJV-C,TOTE421-ADJV,TOTE421-ADJV-C,TOTE422-ADJV,TOTE422-ADJV-C,TOTE481-ADJV,TOTE481-ADJV-C,TOTE482-ADJV,TOTE482-ADJV-C
Part Number DHCS10A
Part Number FFSL1-6