BRISKHEAT SERIES 330 INLINE TEMPERATURE CONTROLLER
As low as
$200.00
BRISKHEAT SERIES 330 INLINE TEMPERATURE CONTROLLER is available to buy in increments of 1
Series 330 Inline Temperature Controller. 90 - 250 VAC. PT100-RTD Temperature Sensor Input.
Requires Remote Control Unit for Programming. IP67 Enclosure. CE
- Outdoor and wet-area use
- Sleek in-line design
- Fast-Adaptive-Tuning adjusts control parameters to your process
- LED status indicator
- Plug & Play design
- Remote control programming
- Adjustable min/max temperatures
- Heater and sensor wires in one connection
- Accessories for wall or pipe mounting
- Input Voltage: 90—260 VAC, 50—60 HZ
- Max Amp Load: 10 amps
- Temperature Control Range:
- Type-K Thermocouple: -200°C to 1350°C (-328°F to 2462°F)
- PT100-RTD: -25°C to 600°C (-13°F to 1112°F)
- Temperature Display Units: °C on remote
- Display: 3-color LED for signaling of operating conditions
- Sensor input options: Option for Type-K thermocouple or PT100-RTD
- Operation: FAT, Fast-Adaptive-Tuning • Input Power Cord/Connections: 1 m (3.3 ft) long with 2-pin grounded Euro plug
- Output Power Cord/Connection: 0.6 m (1.9 ft) long with 6+PE connector
- Safety Features: Safety-shutdown-relay (breaks heating power circuit on sensor failure)
- Environmental Exposure:
- Operating range: -20°C to 45°C (-4°F to 113°F)
- Storage range: -20° C to 85°C (-4° F to 185°F)
- Relative humidity: < 100% non-condensing temperatures
- Enclosure dimensions (including cables): 2100 mm long x 45 mm wide x 21 mm high (8.27 in x 1.75 in x 0.82 in)
- Enclosure Protection: IP67
from BriskHeat
More Information
Manufacturer
BriskHeat
Thermocouple Type
No
Temperature Range
No
Write Your Own Review